Energy News  
BIO FUEL
Ultrathin fuel cell uses the body's own sugar to generate electricity
by Jennifer Chu for MIT News
Boston MA (SPX) May 13, 2022

Silicon chip with 30 individual glucose micro fuel cells, seen as small silver squares inside each gray rectangle.

Glucose is the sugar we absorb from the foods we eat. It is the fuel that powers every cell in our bodies. Could glucose also power tomorrow's medical implants?

Engineers at MIT and the Technical University of Munich think so. They have designed a new kind of glucose fuel cell that converts glucose directly into electricity. The device is smaller than other proposed glucose fuel cells, measuring just 400 nanometers thick, or about 1/100 the diameter of a human hair. The sugary power source generates about 43 microwatts per square centimeter of electricity, achieving the highest power density of any glucose fuel cell to date under ambient conditions.

The new device is also resilient, able to withstand temperatures up to 600 degrees Celsius. If incorporated into a medical implant, the fuel cell could remain stable through the high-temperature sterilization process required for all implantable devices.

The heart of the new device is made from ceramic, a material that retains its electrochemical properties even at high temperatures and miniature scales. The researchers envision the new design could be made into ultrathin films or coatings and wrapped around implants to passively power electronics, using the body's abundant glucose supply.

"Glucose is everywhere in the body, and the idea is to harvest this readily available energy and use it to power implantable devices," says Philipp Simons, who developed the design as part of his PhD thesis in MIT's Department of Materials Science and Engineering (DMSE). "In our work we show a new glucose fuel cell electrochemistry."

"Instead of using a battery, which can take up 90 percent of an implant's volume, you could make a device with a thin film, and you'd have a power source with no volumetric footprint," says Jennifer L.M. Rupp, Simons' thesis supervisor and a DMSE visiting professor, who is also an associate professor of solid-state electrolyte chemistry at Technical University Munich in Germany.

A "hard" separation
The inspiration for the new fuel cell came in 2016, when Rupp, who specializes in ceramics and electrochemical devices, went to take a routine glucose test toward the end of her pregnancy.

"In the doctor's office, I was a very bored electrochemist, thinking what you could do with sugar and electrochemistry," Rupp recalls. "Then I realized, it would be good to have a glucose-powered solid state device. And Philipp and I met over coffee and wrote out on a napkin the first drawings."

The team is not the first to conceive of a glucose fuel cell, which was initially introduced in the 1960s and showed potential for converting glucose's chemical energy into electrical energy. But glucose fuel cells at the time were based on soft polymers and were quickly eclipsed by lithium-iodide batteries, which would become the standard power source for medical implants, most notably the cardiac pacemaker.

However, batteries have a limit to how small they can be made, as their design requires the physical capacity to store energy.

"Fuel cells directly convert energy rather than storing it in a device, so you don't need all that volume that's required to store energy in a battery," Rupp says.

In recent years, scientists have taken another look at glucose fuel cells as potentially smaller power sources, fueled directly by the body's abundant glucose.

A glucose fuel cell's basic design consists of three layers: a top anode, a middle electrolyte, and a bottom cathode. The anode reacts with glucose in bodily fluids, transforming the sugar into gluconic acid. This electrochemical conversion releases a pair of protons and a pair of electrons. The middle electrolyte acts to separate the protons from the electrons, conducting the protons through the fuel cell, where they combine with air to form molecules of water - a harmless byproduct that flows away with the body's fluid. Meanwhile, the isolated electrons flow to an external circuit, where they can be used to power an electronic device.

The team looked to improve on existing materials and designs by modifying the electrolyte layer, which is often made from polymers. But polymer properties, along with their ability to conduct protons, easily degrade at high temperatures, are difficult to retain when scaled down to the dimension of nanometers, and are hard to sterilize. The researchers wondered if a ceramic - a heat-resistant material which can naturally conduct protons - could be made into an electrolyte for glucose fuel cells.

"When you think of ceramics for such a glucose fuel cell, they have the advantage of long-term stability, small scalability, and silicon chip integration," Rupp notes. "They're hard and robust."

Peak power
The researchers designed a glucose fuel cell with an electrolyte made from ceria, a ceramic material that possesses high ion conductivity, is mechanically robust, and as such, is widely used as an electrolyte in hydrogen fuel cells. It has also been shown to be biocompatible.

"Ceria is actively studied in the cancer research community," Simons notes. "It's also similar to zirconia, which is used in tooth implants, and is biocompatible and safe."

The team sandwiched the electrolyte with an anode and cathode made of platinum, a stable material that readily reacts with glucose. They fabricated 150 individual glucose fuel cells on a chip, each about 400 nanometers thin, and about 300 micrometers wide (about the width of 30 human hairs). They patterned the cells onto silicon wafers, showing that the devices can be paired with a common semiconductor material. They then measured the current produced by each cell as they flowed a solution of glucose over each wafer in a custom-fabricated test station.

They found many cells produced a peak voltage of about 80 millivolts. Given the tiny size of each cell, this output is the highest power density of any existing glucose fuel cell design.

"Excitingly, we are able to draw power and current that's sufficient to power implantable devices," Simons says.

"It is the first time that proton conduction in electroceramic materials can be used for glucose-to-power conversion, defining a new type of electrochemstry," Rupp says. "It extends the material use-cases from hydrogen fuel cells to new, exciting glucose-conversion modes."

Research Report:"Ceramic-Electrolyte Glucose Fuel Cell for Implantable Electronics"


Related Links
Massachusetts Institute of Technology
Bio Fuel Technology and Application News


Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor
$5 Billed Once


credit card or paypal
SpaceDaily Monthly Supporter
$5 Billed Monthly


paypal only


BIO FUEL
Mystery solved about active phase in catalytic CO2 reduction to methanol
Stockholm, Sweden (SPX) May 06, 2022
Researchers at Stockholm University have for the first time been able to study the surface of a copper-zinc catalyst when carbon dioxide is reduced to methanol, the results are published in the scientific journal Science. A better knowledge of the catalytic process and the possibility of finding even more efficient materials opens the door for a green transition in the chemical industry. Methanol is currently one of the most important petrochemical basic chemicals, with an annual production of 110 ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

BIO FUEL
Scientists create reliable and renewable biological photovoltaic cell

Highly efficient large-area perovskite LEDs for next-gen display technology

Towards more efficient, non-toxic, and flexible thin-film solar cells

Citizen science for the advancement of solar energy

BIO FUEL
Russia may cut gas to Finland soon: energy group

Saudi expects 13 million bpd oil capacity by 2027: minister

New UAE president meets Macron, Johnson as world leaders stream in

Engineering piezoelectricity and strain sensitivity in CdS

BIO FUEL
Sandstorm blankets Saudi capital in grey haze

Thousands hospitalised as latest sandstorm brings Iraq to standstill

Climate change made deadly S. Africa rains twice as likely

Worst drought in decades devastates Ethiopia's nomads

BIO FUEL
For plasma with a hot core and cool edges, Super-H mode shows promise

Energy storage critical to deeply decarbonized electricity systems

Electric eels inspired the first battery two centuries ago

MIT expands research collaboration with Commonwealth Fusion Systems

BIO FUEL
Ultrathin fuel cell uses the body's own sugar to generate electricity

Mystery solved about active phase in catalytic CO2 reduction to methanol

Using human energy to heat buildings will pay off

Dung power: India taps new energy cash cow

BIO FUEL
Most automakers fall short on climate goals: report

New Zealand to boost electric car sales

On the road to cleaner, greener, and faster driving

Dirty liberal pipe-dream: 3 myths about electric cars

BIO FUEL
Wheat prices hit record high after Indian export ban

Iraq's prized rice crop threatened by drought

Scientists grow plants in lunar soil

UN talks to tackle degraded land 'emergency' begin

BIO FUEL
Microsoft moves to avert EU antitrust clash over cloud

Mitsubishi Electric develops technology for the freeform printing of satellite antennas in outer space

Terran Orbital delivers NASA's CubeSat Proximity Operations Demonstration to SpaceX for launch

Researchers develop 3D-printed shape memory alloy with superior superelasticity









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.